Now the technology has developed and we can see there are so many new inventions are available. As like this now we can see several kind of Operating systems are available. Raspberry Pi foundation has developed the Raspbian Operating system. And this is one of the newest Operating system which has more converses. So today let we see if you are beginner, then how easily use the Operating System with the help of Raspbian with Noobs. Sometimes you may face several troubles relating Raspbian. So have a look on this.
What is NOOBS?
Yes as I mentioned earlier if any one fresh to Raspbian then they may face several types of problems relating the operating System. Yes the Raspbian has commencement on June 2012 and it is still under several type of developing. Further Raspbian has more than 35000 of packages to formats for easy to use. To easily install the Raspbian operating system onto Raspberry Pi’s SD card you can use NOOBS installer. Rather than installing the OS with Single click, you can use it to install over a network or install multiple OS on multiple partitions.
Requirements for NOOBS
Are you ready to use NOOBS? Ok then you needs to have the follow things within you.
- A Raspberry Pi (any model you wish to have from the Original to the newest Raspberry Pi2)
- SD card/Micro SD card (for latest model) and that want to 4GB or larger (If you need you can also purchase a micro SD/SD card which have pre-installed NOOBS. But it is more expensive than the others)
- A computer with SD card slot
Installing Raspbian using NOOBS
You want to download NOOBS. Here if you are familiar with torrent then you can download the NOOBS file via torrent. But the simplest format to download NOOBS is via Zip archive of the file. Here if you have the older version of the Raspbian within the SD card you wish to install then it is better to backup file from the SD card.
Once you have the SD card then you can easily copy the NOOBS extracted files. Yes here you need a simple copy and paste.
Now once the file has copied then insert the micro SD card into Raspberry Pi and then plug it in to a power source.
When the installer has loaded you should check the box for Raspbian and then click on the Install
When pop up a warning message click “Yes” there. OK now have a seat and wait, it will take few time but OS will install
And I have said that NOOBS allow you to install one or more Operating systems. So rebooting your Raspberry Pi will happening as the OS you selected. Yes if you install a single OS then it will automatically boot. But you select more than one OS then a boot sector will displayed.
Raspbian is the operating system designed for Raspberry Pi hardware. So through this resource I would like to bring you the Raspbian Install Guide which goes with image download in the operating system different to the Raspbian install with NOOBS. So get through the complete note on installing Raspberry Pi operating system image on the SD card.
Most common recommendation to Raspbian Download is NOOBS method which is easier in all side handling. But if you are more advanced and required the specific image to be installed, this guide would be helpful. But make sure to be prepared with another Computer with a SD card reader to go on installation successfully.
Official images for the respected operating system can be easily found by heading the official Raspberry Pi website and also from third party distributors.
You can download it as a zip file which you have to extract/unzip to get the image file to install on the SD card.
Raspbian Install Guide- How to Write the Image to the SD card?
You can run the installation through Windows, Mac or Linux with separate installation guides. So go through the right method to write the image on SD card depending the image file and image writing tool.
- Insert the SD card to the reader and check whether you get the drive letter as “G:” (You can either use SD card slot or a different adapter in a USB port)
- Download “Win32DiskImager” utility from the related project page as a zip file which you can run with a USB drive
- Extract the zip file and get the compatible extensions as “Win32DiskImager” and run as administrator right clicking on the file
- Now select the extracted image file
- Select the correct drive letter of the SD card
- Click “write” and wait some minutes
- As you are done, eject the SD card by existing the imager
Using Mac OS:
In here you have a choice. But I give you the mostly used method with graphical tool ImageWriter to successfully process writing the image on the SD card
- Connect the SD card to the reader (Must have formatted as FAT32)
- Pick “About this Mac” from the menu and go to “More info” (For Mac OS X 10.8.x Mountain Lion or later versions). Then click for “System report”
- Click USB or card reader and look for SD card in the window
- If found click on it and continue searching for the BSD name which will look like “disk(number)”
- Unmount the partition to overwrite the disk (In some cases you will be required to verify disk before unmounting which will give you the BSD name similar to /dev/disk1s1 )
- Then run the command from the terminal (replace the “n” with the previous noted number)
Use of “dd” tool can overwrite the partitions of your machine which could result removal of your primary Linux partitions. So run with good care
- Go with “df-h” to find what devices are mounted currently
- Then connect the reader to the Computer if you have no slot for SD cards
- Process “df-h” once more
- The left column shows the device name of the SD card and its last part will stand for the partition number. But as now we need the not only a single partition but the whole SD card, you need to remove the part from the displayed name
- Now note the name and unmount it to prevent reading/writing when you are copying over the SD image in steps ahead
- Unmount it with the SD card name + the partition number
- In the latter write the image to the SD card with the command, make sure to go with the right device name
- Make sure to set the block size 4M or 1M
- If you are not logged into the process as root, prefix with “sudo”
- It will take few minutes in writing on the SD card
- SD card might probably be bigger than the image but as “dd” going to make the copy of the whole card you can easily continue
- Run “Sync” to confirm that cache is flushed and safe to unmounting
- Remove the SD card
Raspbian Install Guide flows as above which can more easily conduct with NOOBS. But as this image installing is preferred by advanced users we today came with this quick Raspbian Install Guide. If you find anything more to know, stay with us as we are glad bring you all about Raspbian installing, Raspberry Pi, and more.