Raspbian with Noobs- Things you need to know about NOOBS

Now the technology has developed and we can see there are so many new inventions are available. As like this now we can see several kind of Operating systems are available. Raspberry Pi foundation has developed the Raspbian Operating system. And this is one of the newest Operating system which has more converses. So today let we see if you are beginner, then how easily use the Operating System with the help of Raspbian with Noobs. Sometimes you may face several troubles relating Raspbian. So have a look on this.

What is NOOBS?

Yes as I mentioned earlier if any one fresh to Raspbian then they may face several types of problems relating the operating System. Yes the Raspbian has commencement on June 2012 and it is still under several type of developing. Further Raspbian has more than 35000 of packages to formats for easy to use. To easily install the Raspbian operating system onto Raspberry Pi’s SD card you can use NOOBS installer. Rather than installing the OS with Single click, you can use it to install over a network or install multiple OS on multiple partitions.

Requirements for NOOBS

Are you ready to use NOOBS? Ok then you needs to have the follow things within you.

  • A Raspberry Pi (any model you wish to have from the Original to the newest Raspberry Pi2)
  • SD card/Micro SD card (for latest model) and that want to 4GB or larger (If you need you can also purchase a micro SD/SD card which have pre-installed NOOBS. But it is more expensive than the others)
  • A computer with SD card slot

Installing Raspbian using NOOBS

You want to download NOOBS. Here if you are familiar with torrent then you can download the NOOBS file via torrent. But the simplest format to download NOOBS is via Zip archive of the file. Here if you have the older version of the Raspbian within the SD card you wish to install then it is better to backup file from the SD card.

Once you have the SD card then you can easily copy the NOOBS extracted files. Yes here you need a simple copy and paste.

Now once the file has copied then insert the micro SD card into Raspberry Pi and then plug it in to a power source.

When the installer has loaded you should check the box for Raspbian and then click on the Install

When pop up a warning message click “Yes” there. OK now have a seat and wait, it will take few time but OS will install

Raspbian Download

And I have said that NOOBS allow you to install one or more Operating systems. So rebooting your Raspberry Pi will happening as the OS you selected. Yes if you install a single OS then it will automatically boot. But you select more than one OS then a boot sector will displayed.

Raspbian Install Guide to Download Image in the OS

Raspbian is the operating system designed for Raspberry Pi hardware. So through this resource I would like to bring you the Raspbian Install Guide which goes with image download in the operating system different to the Raspbian install with NOOBS. So get through the complete note on installing Raspberry Pi operating system image on the SD card. 

Raspbian install guide

Most common recommendation to Raspbian Download is NOOBS method which is easier in all side handling. But if you are more advanced and required the specific image to be installed, this guide would be helpful. But make sure to be prepared with another Computer with a SD card reader to go on installation successfully.

Download Image

Official images for the respected operating system can be easily found by heading the official Raspberry Pi website and also from third party distributors.

You can download it as a zip file which you have to extract/unzip to get the image file to install on the SD card.

Raspbian Install Guide- How to Write the Image to the SD card?

You can run the installation through Windows, Mac or Linux with separate installation guides. So go through the right method to write the image on SD card depending the image file and image writing tool.

Using Windows:

Raspbian install guide

  • Insert the SD card to the reader and check whether you get the drive letter as “G:” (You can either use SD card slot or a different adapter in a USB port)
  • Download “Win32DiskImager” utility from the related project page as a zip file which you can run with a USB drive
  • Extract the zip file and get the compatible extensions as “Win32DiskImager”  and run as administrator right clicking on the file
  • Now select the extracted image file
  • Select the correct drive letter of the SD card
  • Click “write” and wait some minutes
  • As you are done, eject the SD card by existing the imager
Using Mac OS:

Raspbian install guide

In here you have a choice. But I give you the mostly used method with  graphical tool ImageWriter to successfully process writing the image on the SD card

  • Connect the SD card to the reader (Must have formatted as FAT32)
  • Pick “About this Mac” from the menu and go to “More info” (For Mac OS X 10.8.x Mountain Lion or later versions). Then click for “System report”
  • Click USB or card reader and look for SD card in the window
  • If found click on it and continue searching for the BSD name which will look like “disk(number)”
  • Unmount the partition to overwrite the disk (In some cases you will be required to verify disk before unmounting which will give you the BSD name similar to /dev/disk1s1 )
  • Then run the command from the terminal (replace the “n” with the previous noted number)
Using Linux:

Raspbian install guide

Use of “dd” tool can overwrite the partitions of your machine which could result removal of your primary Linux partitions. So run with good care

  • Go with “df-h” to find what devices are mounted currently
  • Then connect the reader to the Computer if you have no slot for SD cards
  • Process “df-h” once more
  • The left column shows the device name of the SD card and its last part will stand for the partition number. But as now we need the not only a single partition but the whole SD card, you need to remove the part from the displayed name
  • Now note the name and unmount it to prevent reading/writing when you are copying over the SD image in steps ahead
  • Unmount it with the SD card name + the partition number
  • In the latter write the image to the SD card with the command, make sure to go with the right device name
  • Make sure to set the block size 4M or 1M
  • If you are not logged into the process as root, prefix with “sudo”
  • It will take few minutes in writing on the SD card
  • SD card might probably be bigger than the image but as “dd” going to make the copy of the whole card you can easily continue
  • Run “Sync” to confirm that cache is flushed and safe to unmounting
  • Remove the SD card

Raspbian Download

Raspbian Install Guide flows as above which can more easily conduct with NOOBS. But as this image installing is preferred by advanced users we today came with this quick Raspbian Install Guide. If you find anything more to know, stay with us as we are glad bring you all about Raspbian installing, Raspberry Pi, and more.

Raspbian Download- Installation and Guide to Use

As the result of technology changes, we find different operating systems born. Raspbian is now another choice in view optimized for Raspberry Pi hardware. But it does more than a pure role of an OS including number of packages, pre-compiled software with a nice arrangement setting easy handling on the Raspberry Pi. So let’s take a quick look on Raspbian Download if you too like to try this open source operating system based on the most reputed Debian Linux Distribution. 

Raspbian Download


As once stated Raspbian is set with more than 35,000 packages with a nice format to work too. It has marked the debut in Month of June 2012 but still find under different level of developing. So like the Debian packages we already know Raspbian too in an active developing era aiming an improved stability and improvement in the performing.

How to Download and Install Raspbian?

You can install Raspbian with NOOBS or go with a different installation guide installing the operating system images. But here I must say that NOOBS Download is much easier for many users in Raspbian Download as installing operating system images is mostly done by advanced users.

NOOBS simply comes as the system brought to view by the Raspberry Pi foundation to Download and install the operating systems onto the Raspberry Pi’s SD card.  It is much easier to proceed and allow you to download and use multiple partitions for multiple operating system functioning. So there NOOBS let you install multiple operating systems and making you easily switch between them.

Set up the Raspberry Pi with Raspbian Download?

Raspbian has number of pre built libraries with hope of considerable optimization in the OS. So let’s see how to set up the Raspberry Pi with Raspbian Download as a powerful and more efficient OS.


  • Raspberry Pi model with less RAM and no Ethernet
  • Suitable SD card
  • Mouse and keyboard
  • Micro USB cable and 5V power supply

Prepare the SD card– To get the installer setup for the SD card format it depending on the operating system

Download NOOBS– NOOBS here simplifies the process. So head the genuine page and download recent NOOBS  and extract the ZIP folder. If done locate the relevant facts at the top level of your SD card

Prepare the Pi–  Use either HDMI or component video and connect display

Connect USB Peripherals- Now connect the Mouse and Keyboard using both the USB ports on the Pi

Insert SD card– Check the proper location and insert the SD card you prepared in the previous steps. If needed you can connect Ethernet too

Raspbian Download

Connect power– Link the micro USB to the wall adapter while linking the other end to the Pi. Once power is given the Pi will begin boot up looking the content on the SD card

Install Raspbian– As the first step here you have to select the image and install. So go ahead with Raspbian Download

Raspbian Download

With several minutes later you will Raspberry Pi reboots as NOOBS run through the installing. After a little while you will find the configuration tool. So there you can expand file system, enable camera, set password and so number of adjustments and finally let the Pi reboot. So then you will be able to see Raspbian desktop in view.

This is basically how to get the Pi up and working with Raspbian. But there might be slight changes with the process depending the Pi model you are using. So start with this and build more with.

Raspbian Jessie with Pixel

Thanks to the Raspberry Pi foundation, an alluring desktop for raspberry Pi is recently released.  This is Chromium Browser, which sits with Epiphany as the default web browser together supporting more apps. This was welcomed on 25th of November 2016 with kernel version 4.4.

Raspbian Jessie Lite

Raspbian Jessie Lite is a Minimal image based on Debian Jessie which was released on 25th of November 2016 with Kernel version 4.4. It comes fixed with bugs, updated firmware/kernel version, disabled SSH default and more changes like that.

Troubleshooting in the installation

Raspbian Download

  • CD ROM does not support in boot- Check whether it is properly inserted
  • Blank display after first boot- Depending on the display mode select either
  1. HDMI
  2. HDMI safe (If 1 does not work)
  3. Composite PAL (PAL signal out)
  4. Composite NTSC (NTSC signal out)
  • If the Screen is still not in work- Remove the SD by unplugging the Pi and reinsert

If you too with a Raspberry Pi and looking to Raspbian Download as the operating system here we gave a little knowledge about that. If you think these are helpful for you share your comments with us.